English | 华语



 









 

参考库

水上景点/游艇泊港

> Guidelines for Marina Berthing Facilities (140pg)
> Design for Canoe & Kayak Launches (117pg)
> Layout, Design & Construction Handbook for Small Craft (47pg)
>

更多...

浮水防波提

> Three-Dimension Analysis of Moored Cylinder Used As Breakwaters (253pg)
> Three-Dimensional Nonlinear Dynamics of a Moored Cylinder To Be Used As a Breakwaters (271pg)
> Breakwater Stability Under Tsunami Attack for a Site In Nicaragua (220pg)
>

更多...

浮水沼泽地

> Guidelines to Wetland Planning and Construction
> Design Features of a Constructed Mini Wet Pond for Water Quality Control & Runoff Storage (13PG)
> Development of Putrajaya Wetland for Stormwater Pollution Control (8PG)
>

更多...

浮水厢柜/分界线

> Environmental Counter Pollution (18pg)
> Design of Movable Weirs and Storm Surge Barriers (10pg)
> Floating Debris Boom Design Recommendations - Based on physical model study & literature review at UNM (22pg)
>

更多...

铝制&木材产品

> Australian Hardwood & Cypress: Technical & Detailing Guide (32pg)
>

Boardwalk Engineering Guide (12pg)

> Boardwalk (39pg)

>

更多...

航海用品

> Chapter 9 – Fender Systems (31pg)
> Department of Defence Handbook-Mooring Design (264pg)
> Fentek-Marine Fendering Systems (48pg)
>

更多...

 

铝制扶手通道

采用铝质全是高耐度的MGA6000Series。长度从4m至18m,而 宽 度 则 从 0.9 m 至2.0m。完全可以按照所需而定做,可采用防滑铝片或码头,安设滑轮。

 

桥面预制浮桥/走板

Superfloats浮桥桥面由高强度混凝土预制使用明矾/不锈钢钢筋由于海洋环境腐蚀性质的面板。他们更薄(40毫米),由于其重量约束,在剪辑连接螺丝或螺丝灵活运用要求。

超级木桥面板一般都是钢筋混凝土面板采用高强度混凝土与钢的75-100mm的厚度。  更多....

塑料木材

TPC-25TG
25mm X 100mm

TPC-16TG
25mm x 150mm

TPC-13BR
18mm x 80mm

TPC-14BR
18mm x 80mm

TPC-23CL
120mm x 1200mm

TPC-26FP
12mm x 100mm

TPC-31CL
50mm x 50mm

TPC-17SK
10mm x 63mm

 

再生塑料板材的优势

  再生塑料板材 木材 塑料
抗腐烂和白蚁攻击  
水分和防水  
没有分裂,开裂或翘曲  
优秀的尺寸稳定性
不含防腐剂或有害化学物质  
防滑(干湿两用)  
易切,系和涂料  
低的热膨胀和收缩  
天然的抗紫外线能力  
木样光洁度和持久  
防水 抗白蚁和真菌 没有油漆或染色要求

用途

码头

 

行人道

 

浮台

 

户外

16, Jalan Korporat 5/KU 9, Taman Perindustrian Meru, 42200 Klang, Selangor
     (603) 3393 3622   
 superfloats@yahoo.com

Hours: Mon - Fri: 8.30am - 5:30pm  Sat: 8.30am - 1pm